Petrofaq
(Redirected from Main Page)
Jump to navigation
Jump to search
Wiki answers to Frequently Asked Questions about Petroleum Engineering.
Topics | Podcasts | All Categories | All Pages
|
Blog posts: Collaborative articles on LinkedIn
Collaborative articles are a new way to tap in to the collective knowledge of the LinkedIn community so averyone can learn from experts across professional topics. Collaborative articles are knowledge topics published by LinkedIn with insights and perspectives added by the LinkedIn community.. . . more
 1 vote 0 comments PVT and Flow course - Lab PVT Tests CVD
Lab PVT Tests CVD (20160225 Part 1) The Constant Volume Depletion test. This test is mainly conducted on gas condensates, that's reservoir fluids with a dew point. And it can in a few cases be used for what we'll call very volatile or sometimes we refer to it as near critical oils - oils with. . . more
1 vote0 comments PVT and Flow course - Lab PVT Tests DLE
Lab PVT Tests DLE The differential liberation experiment is conducted only for oils. It's the same process if you will as the SEP test BUT the temperature at each stage remains equal to the reservoir temperature. The whole experiment is going on at reservoir temperature. The number of stages. . . more
1 vote0 comments PVT and Flow course - LAB PVT Tests Multistage SEP
A multi-stage separator test. Typically it's two to four stages, most common maybe in the old days was two stages. Reasons: They are really trying to find out what pressure and particularly temperature of the first stage gave the most stock tank oil. Basically you're taking a reservoir fluid. . . more
1 vote0 comments PVT and Flow course - Lab PVT Tests CCE
The constant composition or constant mass expansion test. 1. CCE for oils, and in particular oils that a little bit lower gas flow ratio they're not so compressible, we could call it slightly compressible oils. If you took the the reservoir oil to the surface and flashed it down to stock tank. . . more
1 vote0 comments
|
News & Events:
|